Tarheel Trailblazers Message Board - Need parts for GT iDrive 4.0

07/21/25 at 8:38pm

Tarheel Trailblazers Message Board › Mixed Bag › General Board › Need parts for GT iDrive 4.0 - Parts sites??

‹ Previous Topic | Next Topic ›

Pages: 1

Need parts for GT iDrive 4.0 - Parts sites?? (Read 430 times)

Half-a-fork Little Ring Offline Work Ride Tarheel Trailblazers Posts: 507 Location: Charlotte, NC Joined: 11/26/11	Need parts for GT iDrive 4.0 - Parts sites?? 10/28/13 at 3:18pm	Print Post
	I am looking to get my old bike fully back up and running so that I can leave it in NY for when I travel up there. I have broken the rear triangle twice, and have it welded twice by an aluminum welder. It is good now, but will probably break again. Here is a picture of the same bike (not mine though): (You need to *Login* or *Register* to view media files and links) Does anyone know of any good parts websites, or where I can get a Medium iDrive 4.0 rear triangle? Thanks, Justin

	(You need to *Login* or *Register* to view media files and links) (Attachment deleted) Ride to have fun and enjoy the scenery, not to set records… Packed and ready to roll… (You need to *Login* or *Register* to view media files and links)
	GTalkAIM IP Logged

worker-rider In The Loop Offline Posts: 962 Location: concord nc Joined: 12/18/04	Re: Need parts for GT iDrive 4.0 - Parts sites?? Reply #1 - 10/28/13 at 5:01pm	Print Post
	I know your pain. I have also been through about 6 frames. You can usually find them on ebay. The thing that is diffrent is the front triangle [size wise] the back is the same except for the idrive team. But take a good look where the main pivot attaches sometime throught the years that connection changed. I have 1 rear triangle for a spare hanging in the garage. Just dont jump the bike and you should be ok. Mine hardly ever gets off the ground now. But it climbs like a mountain goat. Point stay seated and pedal. Good luck and check ebay you may find a full frame.

	(You need to *Login* or *Register* to view media files and links) (Attachment deleted)
	IP Logged

Half-a-fork Little Ring Offline Work Ride Tarheel Trailblazers Posts: 507 Location: Charlotte, NC Joined: 11/26/11	Re: Need parts for GT iDrive 4.0 - Parts sites?? Reply #2 - 10/28/13 at 5:11pm	Print Post
	Thanks for the input. There are a couple on pinkbikes.com that I have reached out to people about. Hopefully I will hear something back. The weld is holding so far, but I am not counting on it long term.

	(You need to *Login* or *Register* to view media files and links) (Attachment deleted) Ride to have fun and enjoy the scenery, not to set records… Packed and ready to roll… (You need to *Login* or *Register* to view media files and links)
	GTalkAIM IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›