05/09/25 at 12:31pm
  Tarheel Trailblazers Message Board › Mixed Bag › General Board › "Trails" Page - Add a Table or Matrix
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Print
Normal Topic "Trails" Page - Add a Table or Matrix (Read 755 times)
49er 29er
Newbie
*
Offline


Work Ride Tarheel Trailblazers

Posts: 13
Location: Matthews, NC
Joined: 08/10/09
"Trails" Page - Add a Table or Matrix
12/25/14 at 3:43am
Print Post  
I think it would be very helpful / useful if the "Trails" page had some detail other than just the name of the trail.  Maybe a table (matrix) with the following:

- Name of trail (or location)
- city, state, general location
- number of trails or legs
- total trail length (12 miles)
- difficulty (easy, intermediate, expert, mixed)
- one line description (urban bike path, single track, killer hills, etc.)

Imagine being new to the site and having never heard of any of the local trails.  You must click on every link then hit "Back", etc. just to find out a trail is no where nearby.

Thanks!!
  
(You need to Login or Register to view media files and links) (Attachment deleted)
Back to top
 
IP Logged
 
JokerSC
Little Ring
****
Offline



Posts: 581
Location: Indian Land, SC
Joined: 07/31/09
Re: "Trails" Page - Add a Table or Matrix
Reply #1 - 12/25/14 at 3:17pm
Print Post  
Click on the trail name it gives you a lot of the information you are looking for.
  
(You need to Login or Register to view media files and links) (Attachment deleted)
RideMFRide
Back to top
 
IP Logged
 
renoirbud
Small Cog
***
Offline


Newbie

Posts: 442
Location: China Grove
Joined: 12/12/06
Re: "Trails" Page - Add a Table or Matrix
Reply #2 - 12/25/14 at 10:11pm
Print Post  
I think the google map addresses the last point of the original post.

(You need to Login or Register to view media files and links)
« Last Edit: 12/25/14 at 10:12pm by renoirbud »  
(You need to Login or Register to view media files and links) (Attachment deleted)
E-Bikes = Trail Closures
Back to top
 
IP Logged
 
49er 29er
Newbie
*
Offline


Work Ride Tarheel Trailblazers

Posts: 13
Location: Matthews, NC
Joined: 08/10/09
Re: "Trails" Page - Add a Table or Matrix
Reply #3 - 12/26/14 at 4:47pm
Print Post  
JokerSC wrote on 12/25/14 at 3:17pm:
Click on the trail name it gives you a lot of the information you are looking for.


Yes, I know you can click on any of the trail names to get to the details page.  My point was a  top level Trails page with just a bit more detail on it.  Adding miles, #of trails and city/state will narrow down the couple detail pages you need to visit.
  
(You need to Login or Register to view media files and links) (Attachment deleted)
Back to top
 
IP Logged
 
49er 29er
Newbie
*
Offline


Work Ride Tarheel Trailblazers

Posts: 13
Location: Matthews, NC
Joined: 08/10/09
Re: "Trails" Page - Add a Table or Matrix
Reply #4 - 12/26/14 at 4:52pm
Print Post  
renoirbud wrote on 12/25/14 at 10:11pm:
I think the google map addresses the last point of the original post.

(You need to Login or Register to view media files and links)


Yes the interactive map is great.  I see it is on both the Home page as well as the Trails page.  One suggestion on this map.  Add "CLICK ON MAP" just below the map.  At first look some may not realize it's a link.

Even with the interactive map... I still think it would be useful to include the city/state/general location of each trail... at the top-level Trails page.
  
(You need to Login or Register to view media files and links) (Attachment deleted)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Print
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

Tarheel Trailblazers Message Board » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.