Are you ready to make the step up to a mans bike?  Take the plunge back in time to the awesome world of bad a$$ 26ers.  If you do not own at least one 26er, you can't call yourself a mountain biker!  This is your chance to man up!

Up for grabs to anyone man enough: 2007 Intense Uzzi VPX - Large Frame - $1,200 

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

Lets go for a test ride! One ride and it sells itself!

The frame has only one minor dent from the rear shock bottoming out against the cable housing and brake hose which gets pushed into the bottom of the top tube.  After years of riding and occasional bottom outs it leaves a small dent.  

The frame was powder coated in 2011 by Temecula Valley Powder Coating who handled all of Intense cycles powder coating at the time and this color (Copper) was offered by Intense in 2010-2012. All Pivot Bearings were replaced in 2011 along with lower pivot bolts.

The bike will come with both sets of drop outs (12x150 and 10x135).  You can build this with lighter components as a great trail bike or built up as bad ass DH machine. As it sits she weight 37ish pounds. 

If you have not rode a VPP suspension set up your missing out, these bikes descend extremely well, climb very well for this type of bike and lands jumps softly and quietly. The Uzzi VPX has 196mm (7.72") of buttery smooth bump annihilating rear travel. 

The bike is ready to ride with pedals included.  I have used this bike as my primary trail bike for the past 5 years.  The fork was recently serviced and the rear shock was recently rebuilt by fox.  

Build Specs:
- Frame: 2007 Intense Uzzi VPX - Large 
- Fork: 2009 Fox 36 Van 160 RC2, tapered - Heavy Spring
- Rear Shock: Fox DHX Coil w/ Boost Valve - 550lb spring 
- Wheelset: 2015 Easton Havoc DH (20mmx110 front; 12x150mm rear) - Set up tubless with Stans Freeride kits
- Brakeset: 2002 Hope Tech M4 (two piece caliper) - 4 Piston calipers w/ SS braided hose (203mm front rotor / 183mm rear rotor), freshly bled w/ good pads
- Tires: Brand New Maxxis Ardent 26x2.4 EXO
- Crankset: Shimano Saint M815, 175mm, 83mm BB, 36t
- Bottom Bracket: Shimano Saint
- Chainguide: e13 TRS BB Mount
- Shifter: SRAM X9 - 10 Speed
- Rear Derailure: SRAM X9 10 Speed w/ Clutch
- Cassette: Shimano XT 10 Speed 36t-11t
- Chain: Brand New KHS 10 Speed
- Pedals: Shimano DX SPD Clipless
- Seatpost: Thomson Elite setback
- Stem: Truvativ 40mm
- Handlebars:Specialized Big Hit
- Grips: ODI Yeti Lock on
- Headset: Cane Creek 40 Tapered 1 1/2 - 1 1/8

Extras: 
- Fox Suspension Oil
- Additional Front Hope Brake Lever and #3 Caliper along with a #8 Caliper Half
- Additional Brake Pads
- Additional Seatpost Clamp - Bolt on

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

Best descriptive bike ad.