Page Index Toggle Pages: 1 Print
Normal Topic FS: Two Retro Marin Mount Vision frames (26er's) (Read 444 times)
CanadianinSC
Newbie
*
Offline


Work Ride Tarheel Trailblazers

Posts: 16
Location: SC
Joined: 03/01/17
FS: Two Retro Marin Mount Vision frames (26er's)
04/22/21 at 6:04pm
Print Post  
Hi All,

I am starting to clear out all my MTB belongings and hope somebody can put them to use.  These are 2 NOS (New Old Stock - 2010 era) frames that I purchased a few years ago but never completed.  I can sell with the few components that I set aside for them (all purchased new unless otherwise stated), or sell them as bare frames.  They are 26er's, use 1-1/8" straight steerers, have 68mm English threaded BB shells, and have 135mm QR rear drop-outs.  Each will need a 190mm rear shock and associated bushings/spacers (22mm x M8 front and 42mm x M8 rear).  I think I have a 42mm bushing set for each. The quad link frame is a unique shape and so it doesn't fit all types of shocks or front derailleurs.   I found that a low-mount, side-swing front derailleur worked well so I got one for each (I found new XTR 2x11's for $30, so why not).   

#1 Large 18.5" Black

Frame: Marin Mount Vision Pro Quad XC, aluminum frame, Crank Brothers Sage C external headset 1-1/8"
Front Derailleur:  Shimano XTR FD-M9020-L (2X11 side swing)
Handlebars:  RaceFace Next Carbon Fiber 630mm 
Stem:  Oval Concepts M800 Carbon Fiber 100mm
Seat:  Oval Concepts M600 (black/grey)
Seatpost:  RaceFace Next Carbon Fiber 30.9 x 295mm (purchased used)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

This is basically a bare frame with a few components that I had which I felt suited the frame.  I did some minor blending in a non-visible area to provide clearance for a shock but stopped when I found that it wasn't going to work without extensive material removal.  The blending DOES NOT affect the integrity of the frame and has been touched up.

With parts listed: $250
Bare frame w/headset: $175


#2 Small 15", Orange

Marin Mount Vision 5.8 Quad 120, small (15") aluminum frame, FSA Orbit Xtreme Pro headset 1-1/8"
Fork: Rock Shox 30 Gold TK 100mm fork QR w/lockout
Crank: FSA Afterburner MegaEXO crank (36/24T 175mm)
Pedals: Crank Brothers Double Shot (Orange)
Bottom Bracket: FSA Afterburner MegaEXO
Front Derailleur:  Shimano XTR FD-M9020-L (2X11 side swing)
Handlebars:  Oval Concepts M800 Carbon Fiber 680mm riser (black/orange)
Stem:  Oval Concepts M800 Carbon Fiber 100mm
Seat:  Oval Concepts M300 (black/orange)
Seatpost:  SRAM Truvativ Noir Team carbon Fiber (30.9mm x 350mm)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

With all parts listed:  $400
Without fork: $325
Without fork or crank/pedals: $250
Bare frame w/headset: $175

Both frames are very similar and all parts are interchangeable. 

I do have a NOS Rock Shox SID Race 185mm shock available that I will sell for $40.  It should work fine on either frame.

(You need to Login or Register to view media files and links)      

Thanks for looking.



  
Back to top
 
IP Logged
 
CanadianinSC
Newbie
*
Offline


Work Ride Tarheel Trailblazers

Posts: 16
Location: SC
Joined: 03/01/17
Re: FS: Two Retro Marin Mount Vision frames (26er's)
Reply #1 - 05/02/21 at 12:41pm
Print Post  
All SOLD.  Please close
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Print